Denuo GPS Hits Rev B + Dongles...

This is a quick update on the REF-0 projects I have going.

REF-0s running my Denuo GPS board. All lights green.

The Denuo GPS has hit Revision B. There were very minor changes to the original board, mainly to tweak the BOM. I have also hit firmware version 0.6, which I feel is very stable and reliable. There is always room for improvement, but I am close to calling the firmware "done".

I have also been thinking on what a Denuo GPS retrofit kit for the REF-0 would look like. One of the important steps in prepping a REF-0 for standalone operation is eliminating the need for the interface cable. I have covered multiple techniques for doing this in my previous posts. However, a kit would have to be as simple as possible to install. Looking for unlabeled pins on the bottom of a PCB and soldering fine bodge wires is not a good installation method. Neither is jamming wires into a DB15 socket. For that reason, I made this:

A dongle to replace the interface cable on the KS-24361 units.

It is effectively a "magic dongle" for the KS-24361. It jumpers the necessary pins to eliminate the other box and the interface cable. Plug it into a REF-1 and the unit turns on the outputs and operates standalone. Plug it into a REF-0, install a replacement GPS internally such as the Denuo board, and it hums away all by itself.

There will still be soldering involved in any REF-0 retrofit. But this dongle should greatly simplify things.

As for the Tria GPS board, that project is coming along slowly but surely. Attempting to implement Oncore UT+ compatibility is a big undertaking, but I've made good progress. I have a solid plan to get to the finish line.

That's all for now. I should have something interesting to post about in a week or two. It's a brand new project involving...FPGAs.

Thanks for reading!

- Dan W.

Distractions

If I don't stop getting distracted, I'll never finish the Tria GPS firmware. Hmm...

- Dan W.

Simulating GPS Week Rollover with the Tria GPS

GPS week rollover is an interesting "bug" in the way GPS keeps track of the date. Rollovers are not frequent, but when they do occur, it is possible for equipment reliant on a GPS lock to malfunction. At the very least, equipment made on one side of a rollover may not correctly display the date after the rollover. There are many articles online that cover the issue in-depth, so I won't attempt to explain it here. These are some links:

http://tycho.usno.navy.mil/gps_week.html

http://www.leapsecond.com/notes/gpswnro.htm

http://www.navcen.uscg.gov/?pageName=gpsweek

GPS week rollover can be a problem on older surplus timing gear that is still in operation. The user may have to reset the unit after a rollover, or deal with an incorrect date display. As the Tria GPS module I am designing is meant for use in just such a unit, the Lucent KS-24361, I decided to do some experimentation on the rollover issue with this box. The Tria GPS has a simple text-based user interface over a serial UART, so I added a GPS week rollover simulation to the available options. After this is selected and the unit is power cycled, the GPS module fast-forwards the date and time to 30 minutes before midnight, April 6th, 2019 to simulate the next rollover.

I used a REF-0 for these tests.

Tria GPS warning the user that the simulation is in progress.

Here's the view in SatStat.

Synchronized to GPS time all right... 4 years in the future.

Simulating this on my board is actually very easy to do. I have complete control over the Oncore serial strings and what I send the GPSDO, so changing the date is just a slight modification to the initialization routine.

As the time approached "midnight", I connected to the U-blox LEA-6T module in u-center and ended the automatic survey early. This way, we could hit midnight in normally operating conditions. Being able to modify GPS settings in u-center is a really nice feature of the Tria GPS.

Changing GPS configuration settings in u-center, and seeing the results in SatStat.

For this simulation, I programmed the module to roll the date back to August 1999 at midnight. That, of course, was when the last rollover occurred. Here I am simulating a GPS module that was built between the rollovers and can't display dates beyond April 6th, 2019.

The simulated rollover just occurred. Will the REF-0 handle it ok?

Well, as you may have expected, nothing dramatic happened. I have found the KS-24361 units to be very tolerant of date/time "mishaps". They simply reset their internal clocks after a minute or so when a significant change occurs on the date/time presented in the serial strings. After the rollover, the unit displayed the wrong date, but never threw an alarm or lost lock.

The REF-0 continues to operate normally after the rollover. However, it now shows

the incorrect date that is being sent to it.

If I can inject a problem with the Tria GPS, I can also fix the problem. U-blox modules handle GPS week rollover pretty well, and of course the RTC in the Tria GPS understands more than 1024 weeks. So it's very possible to "fix" the rollover problem and just send the GPSDO the correct date after April 6th, 2019. I modified my simulation routine to do this with good results.

Here the Tria GPS and REF-0 have rolled over to April 7th 2019 with no ill effects.

This sent me on a quest to determine the actual date range supported by the KS-24361 firmware. Is it effectively unlimited, and the only limitation is the GPS module? Or is there some other date rollover we will eventually hit on these units? I simulated dates further in the future and went all the way up to 2038 with no issues. That's when I ran into the 2038 bug in the C time library I am using. Sigh...

We really broke the date on the Tria GPS and REF-0 trying to go past 19 January 2038.

But this is due to a very different rollover bug.

2038 is a long way off, so I'm not going to worry about that one right now.

By this point, dealing with leaps into the future, two different date rollover bugs, and the outer limits of the C time library had given me a headache. I was quite happy to reset the clock to the correct time and wrap things up.

Summary

Playing around with GPS week rollover simulation was an interesting experiment. In the end though, the Tria GPS makes the whole thing a non-issue. One of the many benefits of upgrading to a modern GPS receiver from the Oncore UT+ receivers is that we can better handle things like GPS week limits and leap seconds. This should keep old GPSDOs operating well past the next "rollover".

Thanks for reading!

- Dan W.